Technical Guides & Engineering Resource Center
3.7V LiPo Battery Engineering & Technical Hub
Practical schematics, protection board specs, JST connector pinouts, sizing tools, and compliance guides for hardware engineers and B2B buyers designing portable electronics, IoT devices, GPS trackers, and wearables.
1. PCM Protection Boards, Connectors & Polarity
3.7V LiPo PCM Protection Board Guide
2-wire DW01A & 3-wire dual-8205A + 10K NTC circuit diagrams, 2.4V vs. 3.0V vs. 4.40V LiHV IC specs, and B=3380 vs. B=3435 thermistor comparison.
Battery Connectors in One Table
Pitch, wire gauge, and quick selection matrix across JST PH, SH, GH, ZH, XH, and Molex battery connectors.
Understanding Battery Terminal Polarity
Avoid reverse-polarity board damage by checking Red (+) / Black (−) pin order before plugging into your PCB header.
JST PH2.0 Small Battery Connector Guide
Detailed overview of the 2.0 mm pitch JST PHR-2 connector used as the default on stocked YDL 3.7V LiPo packs.
8 Popular Connectors for 3.7V LiPo Batteries
Visual breakdown of the most common micro connectors for compact enclosures and custom wire harnesses.
Custom Wire & Protection Board Assembly
How to pair bare pouch cells with custom connector leads, 2.4V / 3.0V PCMs, or 3-wire NTC boards.
2. Cell Sizing, 3D Models & Selection Tools
YDL 3D Battery Configurator
Generate and inspect 3D models and datasheets for enclosure fit checks before ordering samples.
Stocked 3.7V LiPo Battery Index Table
Filter hundreds of stocked pouch cell sizes by thickness, width, length, and capacity (mAh).
How LiPo Battery Model Codes Define Size
Decode 6-digit model numbers (e.g. 102050 = 10.0 × 20.0 × 50.0 mm) and understand finished pack tolerances.
How to Quickly Find a Suitable Battery
Step-by-step workflow for matching enclosure dimensions, capacity, and connector requirements.
3. Performance, Charging & Battery Safety
High-Rate vs. Low-Rate Discharge Batteries
Understand standard 0.2C / 0.5C pouch cells vs. higher-rate designs so you match cell chemistry to load current.
LiHV (3.8V / 3.85V) High-Voltage Batteries
Higher energy density with 4.35V–4.40V charge ceilings and dedicated LiHV protection circuits.
Testing LiPo Capacity & Internal Resistance
How to verify real mAh capacity and AC/DC internal resistance during incoming QA.
Why Overcharging Li-ion Batteries Is Dangerous
Thermal risks of exceeding 4.20V per cell and how proper CC/CV charging + PCM protection prevent swelling.
3.7V Li-ion Battery FAQ
Quick answers on storage voltage, cycle life, shipping, and custom sample orders.
GPS Tracker Battery Selection
Recommended capacities, low-quiescent PCMs, and temperature considerations for asset & GPS trackers.
4. Browse All Blog Channels
Need Datasheets, UN38.3 / IEC 62133 Docs, or Custom Pack Engineering?
Tell us your target dimensions, capacity, connector, wire length, and PCM/NTC requirements. Our engineering team supports low-MOQ prototyping and B2B wholesale production.
